Second Generation MEMS Sensor - MiniSense2

View 3D   More Pictures   Brochures

The CDL MiniSense2 is a second generation MEMS based motion sensor. Building on the success of the original MiniSense product, the MiniSense2 uses the latest high accuracy 6 Degrees of Freedom (6DOF) MEMS technology to achieve higher accuracy in pitch, roll and heave measurements. In addition, the MiniSense2 introduces a new range of aiding options to allow use in a far wider variety of applications. An in-built magnetic heading sensor provides a 1 degree heading accuracy and a GPS aiding option allows the system to become a complete real time aided navigation and attitude measurement system. A powerful BlackFin processor provides incredible flexibility and the power to run inertial calculations within the MiniSense2.  This means that a wide variety of client specific tasks can be run inside the system with no need for external processing.   Features:   GPS Integration Small size High accuracy Low cost Light weight Highly adaptable Low Power Rugged   Product Specification   Performance: Range:                                                 Heave                                                   +/- 10m                         Pitch                                                     +/- 90 deg                         Roll                                                      +/- 180 deg Dynamic Accuracy:                Heave                                                                          7 cm or 7% whichever is greater Pitch                                                                            0.25 deg                                 Roll                                                                             0.25 deg Heading                                                                        1 deg            Higher accuracy sensors available upon request Resolution:                Heave                                                                          1 cm Pitch                                                                            0.01 deg Roll                                                                             0.01 deg Power Requirements: Supply voltage                                                             10-36 Vdc Environment: Operating temperature                                                   - 40 to 85˚C Calibrated temperature                                                   0 to 50˚C Non operating Shock                                                      2000g (0.5ms) Dimensions: 44 dia x 134 mm Mounting: 4 holes M4 37 x 37mm