Details of CDLs Field Service Bulletins, provideing information on line and downloadable PDFs http://www.cdltd.net/services.php This FSB details the correct alignment procedure for CDL RLG subsea gyro products without GPS input and consequences of incorrect alignment. Thu, 15 July 2010 http://www.cdltd.net/FSB-001-REVB_services_6.html http://www.cdltd.net/FSB-001-REVB_services_6.html The purpose of this document is to describe to the user how to setup a TOPCON card to work with the MiniPOS2 product line. If the TOPCON card is installed in a Veripos LD2 and require more information on how the Veripos LD2 unit is operated please visit http://help.veripos.com This same procedure will work for MiniPOS2, MiniRLG2 (when used as a Hain generator), MiniPOSNAV. The only products not covered here within are units that have been built and wired specially for an individual customer. If you require clarification on whether the unit has GPS aiding enabled please contact CDL for further information.This FSB details the correct alignment procedure for CDL RLG subsea gyro products without GPS input and consequences of incorrect alignment. Thu, 3 Jun 2010 http://www.cdltd.net/FSB-002_services_4.html http://www.cdltd.net/FSB-002_services_4.html The purpose of this document is to describe how to reset to factory defaults in the RLG range of products in the event that the EEPROM has become corrupted. Mon, 14 Jun 2010 http://www.cdltd.net/FSB-003_services_5.html http://www.cdltd.net/FSB-003_services_5.html